Open 24 hours, 7 days a week

Auto Locksmith Ford in St Albans and Hertfordshire

Herts Car Keys makes and programs Ford keys at the vehicle, across St Albans and Hertfordshire, from a base at Peartree Farm in Welwyn Garden City. A Ford takes one of 4 key systems built between 1995 and the current cars, running from Texas Fixed 4C through to HiTag Pro ID47 to E-PATS, on the FO21 and HU101 blades. Every one of them is worked at the vehicle rather than at a dealer. Darius Arbaciauskas attends himself. Car keys start from £120 and every key carries a 12 month warranty.

  • 4 key systemsCovered on this make
  • £120Car keys start from
  • 12 monthsWarranty on every key

Request a quote online

  • Over 7,000jobs completed
  • 5.0from 130+ Google reviews
  • SERMI approvedDBS checked and fully insured
  • 12 month warrantyon every key

Ford Key Systems by Model Year

Ford has run 4 key and immobiliser systems in the United Kingdom, from Texas Fixed 4C through to HiTag Pro ID47 on cars of 1995 to 2023 to E-PATS on 2000 onward.

Key systemApproximate yearsWhat it is
Texas Fixed 4C through to HiTag Pro ID471995 to 2023Used on Fiesta across its life, with blades FO21 then HU101
PATS Iapproximately 1996 to 1998, in the mid 1990sAn RF transponder in the key head sends a unique identification code and one working key is enough to program
PATS IImid 1998 onward, standard across the Ford range for 1999The same RF transponder principle, but two working keys are required to program
E-PATS2000 onwardAn encrypted transponder in the key

Year bands overlap, because a manufacturer changes system part way through a model run rather than on the first of January.

Ford Key Work Covered From St Albans

Six kinds of Ford key work are carried out where the car stands, across the 4 key systems in the table above.

  • Replacement Ford keys. Cut to the FO21 profile at the vehicle and programmed where the key and the vehicle require it, which is the car key replacement work the St Albans page sets out in full.
  • All keys lost on a Ford. A key built from the vehicle itself when nothing is left to copy, which on a E-PATS car is read from the vehicle rather than cut from a code.
  • Ford lockouts. The FO21 lock is picked or decoded using non destructive entry methods designed to avoid damage to the door, the lock and the glass.
  • Spare Ford keys. Cut at the vehicle and programmed where the key and the vehicle require it, from a working original, so the E-PATS system stays as it is.
  • Ford fob and remote faults. A fob that locks the doors and leaves the engine dead points at the remote rather than the E-PATS transponder, and both are tested before a key is quoted.
  • Ford vans and light commercials. Transit, Transit Custom, Transit Connect and Ranger are covered on the same visit as car keys.

The Key Blade Used on a Ford

The blade is the metal part of the key that turns in the lock or sits inside the fob. On Ford the profile is FO21, HU101 and HU198, which decides the blank that is cut and the decoder that opens the lock when no working key is left.

  • FO21. The Tibbe six cut profile, used on early Fiesta and shared with Jaguar.
  • HU101. The Ford sidewinder profile, used on Ford and Jaguar and available as a Silca flip blade and a Lishi tool.
  • HU198. Used on newer Ford models including Bronco Sport 2021 to 2025 and on some Escape and F-150 entries.

Blade codes are an aftermarket convention rather than Ford part numbers, so the blank is checked against the lock on the day.

Ford Models Covered Across Hertfordshire

The key system table above is built from 14 Ford models, and those are the Ford models worked on across St Albans and Hertfordshire. They are Fiesta, Focus, Transit, Transit Custom, Transit Connect, Mondeo, Kuga, Ka, Puma, C-MAX, B-MAX, Galaxy, S-MAX and Ranger.

Ford proximity fob programming on the later models requires an online connection to the manufacturer during the job.

A Ford outside this list is checked against the registration rather than assumed either way, because the key system decides the job and the badge does not.

What a Ford Key Job Costs

Car keys start from £120 and car lockouts from £100. A Ford key sits inside that range or above it according to which of the 4 systems is in the car, because a Texas Fixed 4C through to HiTag Pro ID47 key and a E-PATS key are different parts and different programming.

There is no Ford model or year range that is closed to an independent locksmith. Where a particular vehicle turns out to need manufacturer level access, Darius says so on the phone rather than at the kerb.

Newer Ford models require an online connection to the manufacturer during programming, which is part of the visit rather than an extra.

Known Ford Key and Immobiliser Faults

These are known Ford faults. They are listed because a key that turns out to be a module fault is a different job, and it is cheaper to find that out on the phone.

  • Tibbe lock and key wear on commercial Ford, where the tumblers are stamped steel and the key is nickel silver, so the key wears faster than the tumblers and wear can become an issue on Transit Connect.
  • A worn Tibbe key is hard to decode visually, so the trade cuts a fresh original key by code rather than duplicating a worn key, and wear is not transferred onto the new key.

Programming Tools Used on a Ford

The tool is named because it decides what is possible at the vehicle. These are the tools on the van that cover Ford.

  • Smart Pro. Ford is covered with an optional bypass cable.
  • Advanced Diagnostics software. Programs Ford proximity fobs without NASTF access, but it requires an internet connection.

What Happens When You Call About a Ford

Five steps from the first call to a working key.

  1. Contact Darius. The line is answered at any hour.

  2. Give the registration, the model year and the problem. On a Ford the year decides which key system is in the car, so it decides the tool.

  3. Take the price and the arrival estimate. The exact price is confirmed before work starts.

  4. Darius attends. He checks authorisation where ownership verification is required.

  5. The work is completed and tested at the vehicle. Any key supplied carries the 12 month warranty.

Darius Arbaciauskas, owner of Herts Car Keys, sitting in a car with a key and a key programmer

Who Attends the Ford Job

Darius Arbaciauskas attends every job himself. Six years in the trade, over 7,000 car key and lockout jobs, and one locksmith in the business, so the person who quotes the Ford work is the person who arrives.

He is approved under the SERMI scheme, DBS checked and fully insured, and every key carries a 12 month warranty.

Ford Keys Made at Your Vehicle

Call Darius with the registration and the model year.

Recent Car Key Jobs From the Record

No Ford job is held in the record that can be shown here, so the entries below are other makes.

VehicleWhat happenedOutcome
2016 Vauxhall Astra GTCEvery key goneA replacement key made and programmed on site
2021 Porsche Macan GTSOne key only, original key suppliedA spare key cut and programmed to the vehicle

The town each job was carried out in is not stated, because the record does not hold it.

Makes Closest to Ford by Key System

Three makes that share a key platform with Ford, then the full list.

  • Volvo is covered from the same van and is covered from the same van.

  • Honda is covered from the same van and is covered from the same van.

  • Mazda is covered from the same van and is covered from the same van.

  • All car makes covered lists every make on the van and the makes that are not covered.

Frequently Asked Questions

Call 07308 888825

Can a Ford key be made when every key is lost?

Yes. The lost car key work builds a key from the Ford itself, so nothing has to be copied, and it is carried out where the car stands, at a home, a works unit or the roadside. On a Ford the job depends on which of the 4 key systems is in the car, which is read from the registration.

How much is a replacement Ford key?

Car keys start from £120. A Ford key sits inside that range or above it according to the key system, because a Texas Fixed 4C through to HiTag Pro ID47 key is a different part from a E-PATS key and takes different programming. A spare cut from a working key is the cheaper of the two.

Which key system is in my Ford?

The model year identifies it. Ford ran Texas Fixed 4C through to HiTag Pro ID47 on cars of 1995 to 2023, and E-PATS on 2000 onward. The table on this page lists the 4 systems and the years for each.

Does a Ford key have to go to a dealer?

Not on the models covered here. There is no Ford model or year range that is closed to an independent locksmith, and Herts Car Keys is approved under the SERMI scheme, which gives an independent a recognised route to manufacturer security data on the makes that take part. Where a particular vehicle turns out to need manufacturer level access, Darius says so on the phone.

Which key blade does a Ford use?

Ford uses 3. They are FO21, HU101 and HU198, and the one on a given car follows the model and the year.

Is a Ford that will not start always a key fault?

No. Tibbe lock and key wear on commercial Ford, where the tumblers are stamped steel and the key is nickel silver, so the key wears faster than the tumblers and wear can become an issue on Transit Connect. A no start on a Ford is tested before a key is quoted, because a module fault and a key fault are different jobs at different prices.

Scroll to Top